Payment & Shipping Terms:
|Density:||1.2-1.6g/cm3||Surface:||Single, Double Surfaces Sanding|
|Anti-bending Strengh:||≥16MPa||Major Usage:||Internal And External Wall Bodies|
|Feature:||100% Asbestos Free, Water Resistant,Heat And Sound Resistant||Radioactivity:||Decorative Materials Class A|
Necessary Non-Asbestos Cost Effective Building Materials Wood Grain Fiber Cement Board Siding is in a unique composite of natural fiber and cement, and adopts the international advanced technology and procedure. It is a 100% asbestos free environment friendly wall panel, with the features of fireproof, waterproof, mouse-resistance, insect-resistance, noise-insulation, heat-insulation, anti freezing, light weight, high strength, corrosion resistance, and durability.
Necessary Non-Asbestos Cost Effective Building Materials Wood Grain Fiber Cement Board Siding is applicable to the steel and wood structure residential construction, reconstruction of old houses, movable house, inside and outside decoration works of construction project.
1. Environment friendly
Necessary Non-Asbestos Cost Effective Building Materials Wood Grain Fiber Cement Board Siding is the 100% non -asbestos product. During using, our board will not produce any toxic gas and radiation.
2. Necessary Non-Asbestos Cost Effective Building Materials Wood Grain Fiber Cement Board Siding is fire resistance material. When fire happens ,not only the place occurs the fire,but also the place fire spreads to will be damaged and will bring loss, therefore, the fire resistance of outer wall is very important. Calcium silicate board is with excellent fire resistance character. In addition, it will be not causing crack and stratification after fire.
3. Anticorrosive Necessary Non-Asbestos Cost Effective Building Materials Wood Grain Fiber Cement Board Siding is without any growth condition for fungus, and it will not be mildew in any circumstance.
4. Resistant to insect and termite under 11pa steam curing, the Fiber Cement Siding Board is hardening. Its own structural property decides that the insect and termite can’t survive in the board.
5. Light weight & high strength the wall, hang ceiling or other structural parts, which is made of board and profile, when using the Fiber Cement siding board, it will be with superiority of light weight and high strength.
6. Easy working the installation of board is dry construction, which is fast. It is can be installed with ordinary wood working tool.The board is easy to be processed.
7. Easy decoration various decorative processing can be made for the board surface, such as coating materials or all kinds of adhesive.
8. Small deformation coefficient the materials of Necessary Non-Asbestos Cost Effective Building Materials Wood Grain Fiber Cement Board Siding are cement, quartz-flour, natural xylem fiber and other minerals. Under high temperature autoclave, the calcium from the cement and the silicate from the quartz flour will react to form a new crystal tobermorite. It will harden within 24 hours after molding, therefore the shape of board is steady and deformation coefficient is small.
Size: 200*2440/3000*8mm 192*3005*7.5/9mm
|Anti-freezing||No cracking or delaminating||25 times of freeze-thaw cycles|
|Non-water soaking||No Water Forms after being tested||24 hours|
|Bending strength||Oven dry||Parallel||≥16.0||Mpa|
|Full water condition||Parallel||≥10.0||Mpa|
|Impact resistance||Oven dry||No continuous cracking after one impact||/|
|Remark: please contact our technical department if you need more technical index.|
|Asbestos contain||100% asbestos free||Safe for application|
|Radioactivity||<1.0IRa||Safe for application|
|<1.0Ir||Safe for application|
|Incombustibility||A1||The highest grade|
1.Check to be install wall is smooth and clear wall obstructions.
2. Find out the pending installation of the wall benchmark standards, and pending installation the wall Simiandan line mark to prepare the keel.
3. Emissions and a fixed keel, the keel can be used 50 # light steel keel 2.5 * 3cm wooden poles can also be used. Will keel vertical direction by 60 cm spacing in the wall, expansion fasteners for nails or screws. Requirements for anti corrosion material, or embalming fluid, asphalt preservative treatment of timber with a wooden keel; doors and windows have to be laid around strengthening the keel.
4. Start the installation from the bottom of the first layer of peg board (bottom), and nail or 3.5cm long self-tapping screws to hang the board keel; Note: If you use self-tapping screws in advance with twist drill pre-drilling and nail The plane 0.5-1mm head sink into the external walls of three Lok grain peg board, nail head position to be treated with preservatives and wall putty Phi flat; board nail holes from the board along not less than 1.2cm in a uniform 1.5cm is better ; from the two boards side 2cm.
5. Installation of a second three Lok siding lap method using the same fixed (up and down the two hanging panels overlap to cover 2.5 cm) and so on to install other peg board. Note that when the width of the wall over the length of the peg board, two of the same horizontal line hanging board interfaces should be in the keel, and shall not be vacant connection.
6. Fiber Cement Siding Board level interface to retain 35 mm joints, according to the requirements of fixed finished, can be coated with polyurethane glue (PU25) or tile adhesive to fill joints; one end of the peg board and angles or exterior angle connected to the Department should move closer to the natural, and leave the appropriate gap with glue or tile adhesive seal; installed on top of the last piece of peg board, peg board and the top of the cornice junction should also adhesive seal to the plastic or tiles to achieve a waterproof purpose.
7. Install Fiber Cement Siding Board to the door, window position, cutting the corresponding shape with the Door, window cover shape loft hanging board should be installed to avoid through the seam and connected at playing silicone or with tiles binder filled, to avoid through the slit, resulting in leakage.
8. The junction of two adjacent walls (i.e. the Yin angle and Yang angle) Fiber Cement Siding Board in need of shut up,common approach 45 degrees chamfer patchwork and dedicated Corner shut two kinds approach. Yin angle simply two with the level of the adjacent wall hanging board 90 degrees perpendicular to each other fixed, caulking seams sealed can.
9. Fiber Cement Siding Board installed after a clean brush or towel and wipe again brushing the board of ash or oil. Acrylic exterior paint, the paint is better, one end of both sides brushing the surface of the peg board.
Non-fixed keel installation method:
1. Check to be to install wall is smooth and clear wall obstructions.
2. Find out until the installation of wall benchmark standards for the width calculation based on the peg board and pending installation the wall Simiandan line (peg board horizontal separation line).
3. Began installing the first piece of floor pan of water from the foot of a wall, using the Fischer transmission Anchorage, every 50 cm peg board drilled with a drill and depth of holes drilled in the wall, and filled into the
nylon anchor bolt and fixed the screw. Board nail holes from the board along shall not be less than 1.2 cm, 1.5 cm in a uniform is better; from the two boards side 2 cm.
4. The same fixed overlap method to install the second block of the external walls of three Lok grain sandwich boards (up and down the two hanging panels overlap to cover 2.5 cm) and so on to install the other peg board.